18
Routine Maintenance
4
Washable Filter
* Clean as needed
1. Open the lter cover and remove the lter.
2. Rinse the lter and gently knock out dirt until clean.
Note: Do not touch the surface of the lter with your hands, brush, or hard
objects to avoid possible damage.
3. Leave the lter to dry for at least 24 hours or until completely
dry.
4. Re-install the lter and close the cover.
Notes:
•
Make sure that the lter is completely dry before use.
•
Purchase an additional lter to alternate.
To Next Page
Loading...
