Need help?Do you have a question about the Roborock Auto-Empty Dock AED01HRR and is the answer not in the manual?
General| Dustbin/Bag Capacity | 2.5 L |
|---|---|
| Auto-Empty Function | Yes |
| Charging Function | Yes |
| Frequency | 50/60Hz |
| Model | Auto-Empty Dock AED01HRR |
| Compatibility | Roborock S7, S7 MaxV |
| Rated Input | 100-240V~50/60Hz |
| Rated Output | 20V DC 1.2A |
Safety precautions for product usage, environment, and handling.
Warnings and guidelines related to battery and charging safety.
Overview of the Auto-Empty Dock's main components and features.
Identification of the base unit's parts and connection points.
Identification of the main dustbin components and their functions.
Details on the location and method for storing the power cable.
Identification of the auto-empty dustbin's structure and parts.
Step-by-step guide to assemble the Auto-Empty Dock unit.
Instructions for replacing the robot's standard dustbin with the auto-empty version.
Explanation of the automatic dust emptying process.
Procedure for manually initiating the dust emptying function.
Method to halt the auto-emptying operation.
Guide on installing and using the disposable dust bag.
Process for manually emptying the dustbin.
Instructions for cleaning the dustbin and cyclone separator.
Guide on cleaning the dustbin's filters.
Maintenance procedures for cleaning the air duct.
How to clean and maintain the washable filter.
Steps for cleaning the auto-empty dustbin assembly.
Procedure for replacing the disposable dust bag.
Maintenance of key dock components for proper function.
Troubleshooting common issues indicated by the LED status light.
Solutions for when auto-emptying fails to initiate.
Troubleshooting steps for issues with robot docking and charging.
To Next Page