21
Do not touch the surface of the lter with your hands, brush, or hard objects to avoid
possible damage.
Routine Maintenance
Washable Filter
5
* Clean as needed
1. Open the lter cover and remove the lter.
2. Rinse the lter and gently knock out dirt until clean.
Note:
3. Leave the lter to dry for at least 24 hours or until completely dry.
4. Re-install the lter and close the cover.
Notes:
•
Make sure that the lter is completely dry before use.
•
Purchase an additional lter to alternate.
To Next Page
Loading...
