14
Routine Maintenance
High-Speed Maintenance Brush
1. Lift the high-speed maintenance brush latch and remove the
brush, as shown below.
Charging Contact Areas
Use a soft, dry cloth to wipe the charging contacts on the dock.
2. Remove any entangled objects in the high-speed maintenance
brush and rinse it clean. Reinstall the brush and latch it in
place.
Water Filter
Unlock the water filter and remove it for washing. Use a soft, dry
cloth to wipe the cleaning tank, and then reinstall the filter. Press
down the filter until you hear it lock with a click.
To Next Page
Loading...