Name: Roborock S8
Brand: Roborock
Rating: 5 (1 reviews)

To Previous Page

Common Issues

Is power always being drawn when the

robot is on the charging dock?

• The robot will draw power while it is docked to maintain battery performance, but power

consumption is minimal.

Does the robot need to be charged

for at least 16 hours the first three

times it is used?

• No, the robot can be used any time after it has been fully charged.

Problem

Solution

No or little water during

mopping

Cleaning does not

resume after recharging

• Check whether there is water in the water tank and use the mobile app to set the scrub

intensity or check the manual for full instructions on how to correctly install the mop cloth

and mop cloth mount.

• Make sure that the robot is not in DND mode. DND mode will prevent cleanup. When cleaning a

space requiring a top-up charge, if the robot was placed manually on the charging dock before it

returned to the dock automatically, it will not be able to continue cleanup.

The robot has begun to

miss certain spots

It takes a long time to fill the water tank

• The wall sensor or cliff sensors may be dirty. Wipe them with a soft dry cloth.

• The filter may be blocked and need cleaning.

The robot cannot return to the

charging dock after spot cleaning or

when it has been moved manually

• After spot cleaning or a significant position change, the robot will re-generate the map. If the

charging dock is too far away, it may not be able to return to recharge and must be placed

on the charging dock manually.

Questions and Answers:

Need help?

Do you have a question about the Roborock S8 and is the answer not in the manual?

Roborock S8 Specifications

General