Need help?Do you have a question about the Roborock S4 and is the answer not in the manual?
General| Suction Power | 2000 Pa |
|---|---|
| Battery Capacity | 5200 mAh |
| Run Time | 150 minutes |
| Navigation | LDS Laser Navigation |
| Mapping | Yes |
| App Control | Yes |
| Noise Level | 60 dB |
| Weight | 3.5 kg |
| No-Go Zones | Yes |
| Selective Room Cleaning | Yes |
| Cleaning Modes | Quiet, Balanced, Turbo, Max |
| Filter Type | High-Efficiency Filter |
| App Support | Roborock App |
| Multi-floor Mapping | No |
| Climbing Ability | 20 mm |
| Voice Control | Yes (Amazon Alexa, Google Assistant) |
| Wi-Fi Connectivity | Yes (2.4 GHz) |
| Virtual Walls | Yes (via app) |
| Dimensions | 35.0 x 35.0 x 9.6 cm |
General safety instructions for electrical appliance use, covering shock, fire, and injury risks.
Guide to connecting the power cable, placing the charging dock, and initial charging.
Steps for downloading the app, resetting WiFi, and adding the robot to the Mi Home system.
How to turn the robot on/off, start/pause/stop cleaning, and enter sleep mode.
Resolves errors related to LDS, bumper, wheels, brushes, sensors, and general stuck situations.
Addresses errors for dustbin/filter installation, wet filters, and magnetic field interference.
Troubleshoots low battery, charging errors, battery temperature, and dock power issues.
Resolves errors for dirty sensors, robot tilt, module faults, fan errors, and internal malfunctions.
Fixes issues related to virtual no-go zones or barriers.
To Next Page
