Need help?Do you have a question about the Robosoft Pressbrake ATS 550 and is the answer not in the manual?
Detailed layout of keys on the ATS 550 and ATS 560 control panels.
Instructions for switching the control unit on and off using the key-switch.
Explanation of how to start and stop the hydraulic pump using dedicated keys.
How to navigate between different operating modes using the <Mode> key.
Description and usage of the numerical keypad for data entry.
Function of the <enter> key for confirming numerical values and advancing in mode 0.
How to use the <delete> key to remove programs, steps, or characters.
Usage of arrow keys for incrementing/decrementing values and manual positioning.
How to start and stop back-gauge positioning and program execution.
Explanation of the <retraction> key for preventing collision during bending.
Description of the 3-position switch for controlling beam movement in CE machines.
Overview of function keys A-D for selecting axes and auxiliary functions.
Instructions on using the emergency-stop button to shut down the system.
Explanation of the information displayed on the control panel's screen.
Step-by-step guide for powering on the press-brake control unit.
Procedure for establishing reference points for the back-gauge and depth axes.
Steps required to restart the machine after an emergency stop event.
Introduction to the various operating modes available on the ATS-550 control.
Details on using Mode 0 for manual positioning of axes and basic operations.
Information on using Mode 1 for adjusting machine parameters, intended for qualified personnel.
Guide to calibrating axes by entering preset values in Mode 2.
Explanation of Mode 3 for testing machine functions, for qualified personnel only.
How to create, edit, and manage bending programs and steps in Mode 4.
Instructions for running programmed bending sequences automatically in Mode 5.
Details on loading new software versions, noted as for internal use.
Information on Safety Mode, noted as for internal use.
How to control and adjust the automatic anti-deflection table using auxiliary functions.
List and explanation of synchro-parameters for machine configuration.
List and explanation of parameters related to the back-gauge functionality.
Comprehensive list and explanations of error codes and their meanings.
General| Brand | Robosoft |
|---|---|
| Model | Pressbrake ATS 550 |
| Category | Industrial Equipment |
| Language | English |
To Next Page