Robot Coupe BLIXER 5 Plus - Page 11

10
27/03/2017
• MOTOR SEAL
The motor seal on the shaft should be lubricated
regularly using a food safe lubricant.
In order to keep the motor completely watertight,
it is advisable to check the motor seal regularly for
wear and tear and replace if necessary.
The motor seal can be easily replaced without
having to remove the motor, so we strongly advise
you to ensure that is in good condition.
Rubber piece to scrape
the bowl
Rubber pieces to
scrape the lid.
TECHNICAL SPECIFICATIONS
• WEIGHT
Net Gross
Blixer
®
5 Plus 21 kg 24 kg
Blixer
®
5 V.V. 22 kg 25 kg
Blixer
®
6 23 kg 25 kg
Blixer
®
6 V.V. 24 kg 26 kg
• DIMENSIONS (in mm)
• SCRAPER ARM
The scraper arm is equipped with rubber pieces
which are wearing parts. They should be re-
placed occasionally to always ensure an optimum
efficiency of the scraper arm.
These pieces are easy to dismantle and to
reassemble.
• WORKING HEIGHT
We recommend that you position the machine on a
stable worktop so that the upper edge of the large
feed hopper is at a height of between 1.20 m and
1.30 m.
• NOISE LEVEL
The equivalent continuous sound level when the
machine is operating on no-load is less than 70 db
(A).
• ELECTRICAL DATA
Blixer
®
5 Plus three-phase machine
Blixer
®
5 Plus single-phase machine
Blixer
®
5 V.V. single-phase machine
Blixer
®
6 three-phase machine
BLIXER
®
5 Plus
A = 480
B = 340
C = 280
D = 265
BLIXER
®
5 V.V.
A = 480
B = 340
C = 280
D = 265
BLIXER
®
6
A = 520
B = 340
C = 280
D = 265
BLIXER
®
6 V.V.
A = 520
B = 340
C = 280
D = 265
Motor
Speed
(rpm)
Intensity
(Amp)
230 V/50-60 Hz 300 to 3,500 12
Motor
Speed
(rpm)
Intensity
(Amp)
230 V/50 Hz 3,000 8.5
Motor
Speed 1
(rpm)
Speed 2
(rpm)
Intensity
(Amp)
230-400 V/50 Hz
1,500
230 V=4.0
400 V=2.5
230 V=7.0
400 V=4.0
3,000
240 V/50Hz
1,500
2.7
3.4
3,000
120 V/60Hz
1,800
4.7
6,5
3,600
220 V/60Hz
1,800
2.5
3.4
3,600
Motor
Speed 1
(rpm)
Speed 2
(rpm)
Intensity
(Amp)
230-400 V/50 Hz
1,500
230 V=4.0
400 V=2.5
230 V=7.0
400 V=4.0
3,000
240 V/50Hz
1,500
2.7
3.4
3,000