Robot Coupe R2Dice - R2 Dice Bowl Assembly Instructions; Step 1: Mount Bowl; Step 2: Secure Bowl; Step 3: Install S-Blade

R2Dice Bowl Assembly
Instructions
“S” Blade
Motor Base
Bowl Lid
Bowl
Motor Shaft
Step 1: Place bowl over
motor shaft positioned with
handle slightly to the left.
Step 3: Place “S” Blade on
motor shaft inside bowl and
spin counter clockwise until it
locks in place
Step 4: Place Bowl lid
on with largest tab on
Bowl slightly to the left.
Step 5: Twist slightly counterclock-
wise until tab slides into safety lock
position. Now the unit can be
started.
Step 2: Rotate bowl
counter clockwise until
handle is centered in front.
Properly assembled
“S” Blade Placement