Robot Coupe R2Dice - User Manual

R2Dice Continuous
Feed Assembly
Instructions
Step 1: Place Feed
Lead Base slightly left
of center and turn right
Step 2: Place
Discharge Plate on
Motor Shaft.
Step 4: Place Dicing
Grid with tab facing
rear of machine.
Step 5: Slicing Disc is
installed over Dicing
Grid
Step 6: Tighten Screw
Assembly by Turning
Clockwise until snug but
not locked.
Step 7: Place Top of Continuous
Feed (making sure the tabs are inside
the feed lead base) slightly left of
center and turn right locking it in place.
Step 8:
Place Long
Pusher in
round slot of
Pusher
Assembly.
Slicing Disc
Dicing Grid
Motor Base
Feed Lead
Top
Feed Lead
Base
Long
Pusher
Pusher
Assembly
Discharge Plate
Motor
Shaft
Screw Assembly
Step 9:
Place Pusher
Assembly into
half moon slot
of Top half of
Feed Lead.
Step 10: Prop-
erly Assembled
R2Dice with
Continuous Feed
Attachment.
Now the unit can
be started.
Step 3: Turn Discharge
Plate until it drops.

Summary

R2 Dice Continuous Feed Assembly Instructions

Step 1: Attach Feed Lead Base

Place Feed Lead Base slightly left of center and turn right to attach.

Step 2: Mount Discharge Plate

Place Discharge Plate onto the Motor Shaft.

Step 3: Secure Discharge Plate

Turn Discharge Plate until it drops into place.

Step 4: Install Dicing Grid

Place Dicing Grid with tab facing the rear of the machine.

Step 5: Install Slicing Disc

Install Slicing Disc over the Dicing Grid.

Step 6: Tighten Screw Assembly

Tighten Screw Assembly clockwise until snug, but not locked.

Step 7: Attach Continuous Feed Top

Place Top of Continuous Feed, ensuring tabs are inside the feed lead base, then lock.

Step 8: Insert Long Pusher

Place Long Pusher into the round slot of the Pusher Assembly.

Step 9: Insert Pusher Assembly

Place Pusher Assembly into the half-moon slot of the top half of Feed Lead.

Step 10: Final Assembly Check

Verify proper assembly of R2Dice with Continuous Feed Attachment.

R2 Dice Bowl Assembly Instructions

Step 1: Mount Bowl

Place bowl over motor shaft with handle slightly to the left.

Step 2: Secure Bowl

Rotate bowl counter-clockwise until handle is centered in front.

Step 3: Install S-Blade

Place 'S' Blade on motor shaft inside bowl and spin clockwise to lock.

Step 4: Position Bowl Lid

Place Bowl lid on with the largest tab on the Bowl slightly to the left.

Step 5: Lock Bowl Lid

Twist lid counter-clockwise until tab slides into safety lock position.

Robot Coupe R2Dice Specifications

General

Brand	Robot Coupe
Model	R2Dice
Category	Food Processor
Language	English