Roomba
®
j7 Owner’s Guide 3
EN
Troubleshooting
• Your robot will tell you something is wrong by playing an audio alert and turning
the light ring indicator red. Press the clean button or tap the bumper for details.
Check the iRobot Home App for further support.
• After 90 minutes of inactivity o the charging station, the robot will automatically
end its cleaning job.
• To factory reset your robot, remove the Dust Bin and hold down the clean button
for seven (7) seconds. A sound will let you know when the factory reset has been
completed. Press down the clean button once more to confirm.
Battery safety & postage
For best results, only use the iRobot Lithium Ion Battery that comes with your robot.
WARNING: Lithium ion batteries and products that contain lithium ion batteries are subject to
stringent transport regulations. If you need to post this product for service, travel or any
other reason, you MUST follow the postage instructions below.
• Battery MUST be turned o before postage.
• Turn o the battery by removing the robot from the charging station and holding down
the clean button for 3 seconds with one wheel o the ground. All indicators
will turn o.
• Package the robot securely for postage.
• If you need further assistance, contact our Customer Care team or
visit global.irobot.com.
Cleaning
• Your robot will automatically explore and clean your home in
neat rows, avoiding obstacles using its front-facing camera.
It will return to the charging station at the end of a cleaning
job and whenever it needs to recharge.
• To end a job and send the robot back to its charging
station, hold the clean button down for 2-5 seconds.
A blue light ring pattern will indicate that the robot
is seeking the charging station.
• When your robot detects an especially dirty area, it will
engage Dirt Detect™ mode, moving in a forwards/backwards
motion to clean the area more thoroughly. The light ring
indicator will flash blue.
Your robot is able to recognise and avoid
objects. However, it is still recommended to
remove excess clutter before cleaning.
Just press the clean button
Tap to Start / Pause / Resume
Hold for 2-5 seconds to end a job
When the robot senses its bin needs to be
emptied, the light ring indicator will illuminate in
a red sweeping motion towards the rear.
Red Light Ring
Low battery. Please charge.
To Next Page
Loading...
