Need help?Do you have a question about the Robuschi RBS 155 and is the answer not in the manual?
Safety precautions during blower operation, including temperature and touching components.
Safety precautions to be taken before any intervention on the blower.
Explains the operating principle of the RBS series blower with a figure.
Specifies the suitable operating environment and gases for the blower.
Details the performance limits of the blower, including pressure and temperature.
Describes risks of fire and explosion.
Instructions for positioning and securing the blower horizontally on a level surface.
Explains how to check the alignment of the blower and motor shafts.
Specifies requirements for connecting the blower's piping system.
Instructs to install an emergency push button between the supply line and the motor.
Lists preliminary checks to be performed before operating the blower.
Provides instructions for the first start-up of the blower.
Recommends checking for oil leaks, abnormal noises, or vibrations during the first 8 hours.
Details the normal procedure for stopping the blower.
Provides an ordinary maintenance plan to ensure correct operating conditions and longevity.
Lists safety precautions to be taken before performing any maintenance operation.
Specifies the characteristics of suitable lubricating oils and their selection criteria.
Details the oil quantity and procedure for changing oil in the blower.
Step-by-step instructions for replacing the shaft seal on the blower.
Instructions for cleaning the internal surfaces of the blower's compression chamber.
To Next Page
General