EasyManua.ls Logo

Robuschi RVS 21 User Manual

Default Icon
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
РУ
Руководство по эксплуатации и техническому обслуживанию
водокольцевых насосов
Operating and maintenance instructions for liquid ring pumps
Инструкция по:
- Транспортировк
е
- Монтажу
- Эксплуатации
- Техническому
обслуживанию
Instruction for
- Transport
- Erection
- Operati
on
- Maintenance
ВОДОКОЛЬЦЕВЫЕ НАСОСЫ СЕРИИ RVS
LIQUID RING VACUUM PUMPS - RVS DESIGN
Патент
MI99U000326
Patent
Важный документ! : Сохранять для ознакомления в случае необходимости
Important document! : Preserve for future references
V7.1A05-I
РУССКИЙ
ENGLISH
GB
107023, Россия, г. Москва, ул. Электрозаводская, 23 с.8
Тел./факс.:+7 (499) 703-06-36, info@erstvak.com, www.erstvak.com
107023 Russia, Moscow, Elektrozavodskaya str., 23b.8
Tel./fax.: +7 (499) 703-06-36, info@erstvak.com, www.erstvak.com

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Robuschi RVS 21 and is the answer not in the manual?

Robuschi RVS 21 Specifications

General IconGeneral
BrandRobuschi
ModelRVS 21
CategoryWater Pump
LanguageEnglish

Summary

2 OPERATING FIELD

2.1 Limits during operation in vacuum

Specifies maximum allowable overpressure during vacuum operation based on pump size.

2.2 Limits during operation in pressure

Outlines maximum differential pressure limits for pressure operation by pump size and frequency.

4 MOUNTING INSTRUCTIONS

4.1 On-site positioning

Guidelines for installing the pump unit on a level surface, ensuring stability and adequate ventilation.

4.2 Piping installation

Procedures for connecting main and service liquid piping, emphasizing cleanliness, diameter, and alignment.

4.6 Electric connections

Covers electrical connections, emphasizing skilled personnel, compliance with local codes, and safety precautions.

5 OPERATION

5.1 Controls before start-up

Lists essential checks on pump and connections before initial operation, including alignment and safety devices.

5.3 First start-up

Procedure for the initial start-up, including opening valves, adjusting flow rates, and verifying operation.

6 TROUBLESHOOTING

7 MAINTENANCE

Related product manuals