Robustel GoRugged R3000 Lite Quick Start Guide

Robustel GoRugged M1000 Lite Quick Guide
RT_QG_R3000 Lite_v.1.0.0 25.01.2014 1/8
Robustel GoRugged R3000 Lite Quick Guide
Chapter 1. Interface Introduction
1.1 LED Indicators
After inserting the SIM card into the router and power on, the LED indicators’ status should be as follow when work
normally:
Note ： Please refer to Robustel GoRugged R3000 Lite User Guide to get more details about the LED indicators.
1.2 PIN assignment
DB9 Female Connector
PIN
Debug
RS232
RS485
(2-wire)
Direction
1
Data+ (A)
-
2
RXD
R3000 Lite  Device
3
TXD
Device  R3000 Lite
4
DRXS
Device  R3000 Lite
5
GND
GND
-
6
Data- (B)
-
7
RTS
Device  R3000 Lite
8
CTS
R3000 Lite  Device
9
DTXD
R3000 Lite  Device
1.3 USB interface
Name
Color
Status
RUN
Green
Blinking
PPP
Green
PPP connection is up: On
PPP connection is down: Off
RSSI
Green
At least 2 bars
PIN
Power
10
Positive
11
Negative
12
GND

Robustel GoRugged R3000 Lite Specifications

General

Model	GoRugged R3000 Lite
Category	Network Router
Cellular Network	4G LTE
Ethernet Ports	2 x 10/100 Mbps
Ingress Protection	IP30
Antenna Connectors	SMA
VPN Support	IPsec, OpenVPN, GRE
Power Supply	9 ~ 36 VDC