Roc-Solid SC-2420 User Manual

9
Resetting the controller
If the controller display is showing either “Short circuit” or “Overload Reset” the
controller will require manual resetting once the problem has been fixed. To clear
these displays and reset the functionality of the controller, press the reset button.
The controller will restart and if the problem has been rectified the controller will
operate as normal.
Restoring the Factory default settings
To restore factory default settings press and hold the “MENU” button for 5 se-
conds. The display will show “Loading defaults” and the controller will restart using
the default settings.

Roc-Solid SC-2420 Specifications

General

Brand	Roc-Solid
Model	SC-2420
Category	Control Unit
Language	English