Roc Wheels Rockit - ROCKIT Wheelchair Fitting Guide; Tool Kit and Adjustments; Folding the Wheelchair

To Next Page

To Previous Page

ROCKIT Wheelchair

Fitting Guide

Folding –The ROCKIT Wheelchair

comes with quick releases rear

wheels and a foldable back cane.

For the most compact package,

make sure the chair is tilted all the

way forward and that the position-

ing components are not in the way.

Adjustable Handle Bar

Folding

The following information provides valuable information on the use, adjustment ca-

pability and the function for the various ROCKIT Wheelchair features. When complet-

ing the Measurement Worksheet, please be as thorough and as accurate as possible.

If possible, please include additional pictures if this will help to further illustrate the

nature of the child’s disability.

Tool Kit

The basic adjustment tools for the ROC

Wheelchair are: 7 1/16” nut driver, 5/32

allen wrench, 3/4” wrench for front

wheel caster bolt, tape measure, and

pen.

Other tools can be used for custom con-

figurations

The ROCKIT Wheelchair

handle bar is adjustable by

pressing the buttons at the

base of the handle.