Roche Diagnostics
Operator’s Manual · Version 1.2 11
cobas c pack opener Unpacking and assembly
a Setting up the cobas c pack opener
1
Place the adapter for the cobas c pack large.
2
Connect the power cord. The cobas c pack opener will adjust to the local lines
automatically.
Once the power cord is plugged in, the cobas c pack opener is ready for use.
Before using the cobas c pack opener, check that the power cord is connected properly!
A On/off switch
B Fuse holder
C Power receptacle
Figure 3 Rear view of the cobas c pack opener
A
C
B
To Next Page
Loading...
