13
Problem Possible Reason / Solution
A faint noise is heard when turning the power on or
off.
This is normal and nothing to worry about.
After turning the power on to the keyboard there
was no sound when the keys were pressed.
Check the volume is set to the correct setting. Check that
headphones or any other equipment are not plugged into
the keyboard as these will cause the built-in speaker system
to cut off automatically.
Sound is distorted or interrupted and the keyboard
is not working properly.
Use of incorrect power adapter, or the batteries may need
replacing. Use the power adapter supplied.
There is a slight difference in timbre of some notes. This is normal and is caused by the many different tone
sampling ranges of the keyboard.
When using the sustain function some tones have
long sustain and some short sustain.
This is normal. The best length of sustain for different tones
has been pre-set.
In SYNC status the auto accompaniment does not
work.
Check to make sure that Chord mode has been selected
and then play a note from the first 19 keys on the left hand
side of the keyboard.
Trouble Shooting
Tones
10 tones
Rhythms
10 rhythms
Demos
8 different demo songs
Effect and Control
Sustain, Vibrato.
Recording and Program-
ming
43 Note record memory, Playback, 32
Beat rhythm programming
Percussion
8 different instruments
Accompaniment Control
Sync, Fill-in, Tempo
External Jacks
Power input, Headphone output
Range of Keyboard
49 C2 - C6
Weight 1.66 kg
Power Adapter
Output Power
4W x 2
Accessories included
Power adapter, User guide. Sheet music stand
Specifications
C1<EE$
To Next Page
Loading...
Need help?
General
