7
RF-BTAPDT
6 If you have another Bluetooth device, click Next.
Otherwise, click Skip.
7 When the configuration is done, click Finish.
8 Insert the Bluetooth adapter into your computer, and
wait for the adapter’s LED to turn blue before connecting
to any Bluetooth device.
Connecting to a Bluetooth mouse or keyboard
Before the Bluetooth mouse or keyboard pairing, make sure the
following:
1 Make sure that the Bluetooth software has been installed
and configured according to the instructions in this
guide.
2 Make sure that the batteries for the mouse or keyboard
have been correctly installed and are fully charged.
3 Make sure that the USB Bluetooth adapter has been
plugged into your computer.
4 If you are connecting a mouse, turn on the mouse power.
See the mouse’s user guide for instructions.
RF-BTAPDT_08-1733 ENG.fm Page 7 Thursday, October 16, 2008 2:31 PM
To Next Page
Loading...
Need help?
General
