Package contents
• 360 Chat Headset
• Quick Setup Guide
Using your headset
1 Turn down the volume on the 360 Chat
Headset in-line control by rotating the
volume control all the way down. Insert
the 2.5 mm headset connector into the
controller expansion port at the bottom
of your game controller.
2 Put on the 360 Chat
Headset and adjust
the microphone to
your preferred
position.
Note: Correct
placement of the
headset and
microphone is critical
to using your headset
successfully.
Make sure that the headset goes over the
top of your head, not around the back of
your head. You may rotate the
microphone and earpiece to your right or
left side. Position the microphone about
one inch (2.54 cm) from your mouth and
o to one side. This will ensure that it
doesn’t transmit your breathing into a
chat session.
QUICK SETUP GUIDE
Xbox 360® Chat
Headset
RF-GXB1301
To Next Page
Need help?
General
