QUICK SETUP GUIDE
RF-HTC4818, 4.8A 4-Port Charging Hub
Before using your new product, please read these instructions to prevent any damage.
USING THE POWER HUB
Note: The USB hub is designed for constant use. It can be left
plugged in at all times, even if no USB cords are connected.
1. Plug the USB hub into a power outlet.
2. Plug your USB devices into the USB ports to
power or charge them.
3. Slide the switch on the side to turn the trace
lighting on or o.
PACKAGE CONTENTS
• USB Power Hub
• Quick Setup Guide
FEATURES
• 4 USB ports with 4.8A
total output for constant
power delivery for fast
charging of your devices
• LED lighting around
each USB port for
easy connection
(can be turned o)
• Premium design matches
modern home theater systems
• Weighted base keeps
the USB hub in place
TROUBLESHOOTING
USB hub isn't charging your device:
• Make sure that the USB hub is plugged into a working power
outlet. If you're using a surge protector, make sure
that it's turned on.
• Make sure that your USB cable is properly inserted into your
USB device and the USB hub.
LED trace lighting isn't on
• Make sure that the USB hub is plugged into a working
power outlet. If you're using a surge protector, make sure
that it's turned on.
• Slide the light switch to turn on the trace lights.
USB ports
Light
switch
To Next Page
Need help?
General
