RocketFish RF-HTS100 User Manual

QUICK SETUP GUIDE
Before using your new product, please read these
instructions to prevent any damage.
2-outlet Flat-panel
Surge Protector
with Noise Filtering
RF-HTS100
Congratulations on your purchase of this Rocketsh Surge Protector
with noise ltering.
Your surge protector:
• Provides surge protection for sensitive electronic devices
• Incorporates noise filtering to provide “clean” power that will
maximize the performance of your equipment
Features
• Compact design—Fits conveniently behind a wall-mounted
at-panel TV.
• 43 dB EMI/RFI noise ltering—Ensures that your devices
receives only clean power for maximum product performance.
• 1,200 joules surge protection—Protects your devices from
damaging power surges and spikes.
• LED indicator—Keeps you informed of the surge protection and
grounding status.
• Protected/Grounded—Lights when the surge protection feature
is working correctly and correct wiring is detected. If this LED
does not light when initially plugged in, your surge protector
has detected incorrect wiring. We recommend that you contact
a certied, licensed electrician to inspect your wiring. If this
light goes out, the surge protection feature has reached full
capacity and can no longer absorb additional surges and spikes.
We recommend replacing your surge protector.
Operating instructions
1 Plug your surge protector into a standard 120V AC outlet.
Note: Use the lower outlet if you want to use the upper outlet for
another power cord.
2 Plug one or two devices into your surge protector.
Standard
outlets
LED
indicator

RocketFish RF-HTS100 Specifications

Power

load rating	15 amps
line voltage	125V AC @ 60 Hz
maximum surge current	60, 000 amps

Surge Protection

surge protection	3 lines (L-N / L-G / N-G)
maximum energy dissipation	1, 200 joules
clamping voltage	400 volts

Filtering and Certification

EMI/RFI noise filtering	Up to 43 dB
UL certification	UL-1449 certified