RocketFish RF-HTS210 User Manual

Congratulations on your purchase of this Rocketsh Power Manager
with surge protection and noise ltering.
Your power manager:
• Reduces energy consumption to save environmental resources
and lower your electric bill
• Provides surge protection for sensitive electronic devices
• Incorporates noise ltering to provide clean power that will
maximize the performance of your devices.
Features
1 Main power switch/circuit breaker – controls power to all AC
outlets on the Power Manager, and allows the unit to be reset in
the event of a circuit overload (after the overload condition has
been resolved).
2 6 ft (1.8 m) Soft-Flex™ power cord with right-angle/o-set
plug – enables placement of the Power Manager in the desired
location. The right-angle plug allows you to place furniture as
close as possible to the wall and not block the second AC outlet.
3 One master outlet - controls power to the ve
master-controlled outlets.
4 Three AC adapter spaced outlets – accommodate bulky AC
adapter plugs.
5 Five master-controlled outlets – When the Energy Savings
Switch is ON, these outlets automatically shut down to conserve
energy when the device plugged into the master outlet is
turned o. When the Energy Savings Switch is OFF, these outlets
are always-on.
6 Two always-on outlets – provide continuous power regardless
of Master/Master-controlled outlets state.
7 Power LED indicator - lights to indicate that the power
manager is receiving adequate power from the AC outlet.
8 Protected LED indicator - lights when the surge protection
feature is working properly. If this LED does not light or goes out,
the surge protection feature has reached full capacity and can
no longer absorb additional surges and spikes. The power
manager should be replaced if this light goes out.
QUICK SETUP GUIDE
8-outlet Power Manager
RF-HTS210

RocketFish RF-HTS210 Specifications

General

Brand	RocketFish
Model	RF-HTS210
Category	Surge Protector
Language	English

Summary

Product Features Overview

Main Power Switch/Circuit Breaker

Controls power to all AC outlets and allows the unit to be reset in the event of a circuit overload.

Soft-Flex Power Cord

Features a 6 ft (1.8 m) cord with a right-angle/off-set plug for flexible placement near walls.

Master Outlet Functionality

Controls power to five master-controlled outlets, enabling energy savings when the connected device is off.

AC Adapter Spaced Outlets

Three outlets are spaced to accommodate bulky AC adapter plugs.

Always-On Outlets

Two outlets provide continuous power regardless of the master outlet's state.

Indicator Lights

Power LED indicates power supply; Protected LED shows surge protection status.

Grounded Outlet Indicator

Lights when a properly grounded AC outlet is detected, signaling safe operation.

Energy Savings Switch

Enables energy saving by shutting down master-controlled outlets when the master device is off.

Coaxial Cable Surge Protection

Protects incoming coaxial cable lines from damaging power surges and spikes.

Operating Instructions

Initial Setup and Power

Plug the power manager into a 120V AC outlet and press the main power switch if needed.

Connecting Devices

Connect primary, secondary, and constant-power devices to appropriate outlets.

Coaxial Cable Connection

Connect incoming coaxial cable source to the 'IN' jack and output to TV or satellite box.

Master-Controlled Outlet Operation

Secondary devices power on/off with the primary device; check primary device if not working.

Specifications and Safety

Technical Specifications

Details load rating, voltage, surge protection levels, noise filtering, and certifications.

Safety Precautions

Guidelines on usage, grounding, and avoiding specific connections or situations.

Warranty Information

Details on the one-year limited product warranty and how to obtain further information.