RocketFish RF-TRPM70 - User Manual

QUICK SETUP GUIDE
70" Tripod Monopod Combo
RF-TRPM70
# Component
1 Leveling bubble
2 Center column
3 Leveling bubble
4 Horizontal tilt lock knob
5 Vertical lock button
6 Quick-release plate locking
lever
7 Quick-release plate
8 Vertical tilt lock knob
9 Handle
10 Pan locking knob
11 Center column locking knob
12 Locking collar
13 Flip-lever leg locks
14 Rubber foot with retractable
leg spike
15 Twist screw monopod leg lock
Description
The tripod base is level when the bubble is within the circle.
Adjustable column provides a quick height adjustment. Loosen the center
column locking knob (11), then pull on the center column to adjust the
height.
The panhead base is level when the bubble is within the circle.
Rotate this knob to loosen/tighten and adjust handle (9) for desired
horizontal tilt.
Push this button to release camera platform for vertical setting.
Pull lever to remove the quick-release plate. Place the quick-release plate back
on the tripod and press the lever back into place to secure the plate into
place.
Mount your camera to this plate, then mount this plate to the tripod.
Rotate this knob to loosen/tighten and adjust the vertical tilt up to 90°.
Rotate horizontal tilt lock knob (4) to loosen/tighten and adjust this handle for
desired horizontal tilt.
Rotate this knob to loosen/tighten and rotate the tripod head horizontally.
Rotate this knob to loosen/tighten and pull the center column (2) for desired
height.
Twist to lock the tripod legs in place to provide maximum stability and
strength.
Lift to adjust the leg height, then close to lock.
Provides secure, non-marring footing. Twist rubber feet counter-clockwise to
reveal leg spikes.
Unscrew the leg locks and extend the leg to the desired length.
Before using your new product, please read these
instructions to prevent any damage.
Package contents
• Tripod/Monopod with pan head and quick-release plate
• Extra quick-release plate
• Quick Setup Guide
Features
RF-TRPM70_13-0367_QSG_V3_EN.ai 1 4/9/2013 1:21:48 PMRF-TRPM70_13-0367_QSG_V3_EN.ai 1 4/9/2013 1:21:48 PM

RocketFish RF-TRPM70 Specifications

General

Type	Tripod
Material	Aluminum
Maximum Height	70 inches
Leg Lock Type	Flip Lock
Color	Black
Compatibility	Cameras, camcorders
Weight	4.4 lbs
Head Type	3-Way Pan Head

Summary

Product Features Overview

Center Column

Quick-Release Plate

Mount your camera to this plate, then mount this plate to the tripod.

Using Your Tripod

Leg Lock Adjustment

Adjusting Center Column Height

Attaching Camera to Tripod

Open QR plate lever, lift plate, attach camera to screw, secure plate.

Mounting Camera Plate to Head

Mount camera plate onto tripod head, push lever until it stops to secure.

Vertical and Horizontal Adjustments

Using Your Monopod

Converting to Monopod

Remove center column from tripod base by loosening locking knob.

Extending Monopod Legs

Attaching Camera to Monopod

Attach camera to quick-release plate, then mount plate to monopod head.

Monopod Head Adjustments

Important Safety Instructions & Specifications

General Safety Precautions

Ensure all locks are tightened, legs are open, avoid extreme temperatures and solvents.

Load Limit

Do not exceed the product's load limit of 8.8 lbs (4 kg).

Product Specifications