To Next PageTo Next Page
Need help?Do you have a question about the Rockford Fosgate Prime R600X5 and is the answer not in the manual?
General| Channels | 5 |
|---|---|
| Total Power Output | 600 Watts |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 100 dB |
| Dimensions | 10.4" x 9.9" x 2.5" |
| Crossover | Variable HP/LP/AP 50Hz - 500Hz @ 12dB/octave Butterworth |
| Topology | Class AB |
| RMS Power Output (2 Ohms) | 75 Watts x 4 + 300 Watts x 1 |
| RMS Power @ 2 Ohms | 75 Watts x 4 + 300 Watts x 1 |
| Bridged RMS Power @ 4 Ohms | 150 Watts x 2 @ 4-Ohm |
| Input Sensitivity | 150 mV - 4V |
General safety guidelines, hearing protection warnings, and cautionary symbols for safe operation.
Details on adjustable crossover filters and phase control for sound wave timing.
Explanation of Power/Protect LED, Punch EQ, Gain, Crossover, Input, and Phase controls.
Description of RCA input/pass-thru jacks, speaker terminals, and power/REM terminals.
Information on using high-level speaker signals with optional inputs.
Functionality for remotely controlling the subwoofer output level.
Lists included amplifier components, necessary tools, and wiring materials for installation.
Advice on system layout, wiring routes, component accessibility, mounting, and battery checks.
Detailed instructions for connecting power, ground, remote turn-on, and audio signal cables.
Illustrations for stereo and mono wiring of 2-channel amplifiers.
Diagram showing stereo wiring for 4-channel amplifiers.
Diagrams for mono-bridged configurations of 4-channel amplifiers.
Illustrations for mono-bridged wiring of 4-channel amplifiers.
Diagrams for 3-channel (bridged/parallel) and 5-channel (stereo/mono) configurations.
Illustrations for mono wiring of 250X1 and 500X1D amplifiers.
Diagram for 5-channel (4ch stereo & 1ch mono) configuration.
Step-by-step guide to setting amplifier gain for optimal volume and signal-to-noise ratio.
Adjusting crossover points and utilizing Punch EQ for bass/mid-bass frequency enhancement.
Function of input switch for signal alignment and phase control for sound wave timing.
Using factory radio inputs and installing/operating optional remote subwoofer level control.
