EasyManua.ls Logo

Rockford Fosgate Prime R750-1D User Manual

Rockford Fosgate Prime R750-1D
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Rockford Fosgate Prime R750-1D and is the answer not in the manual?

Rockford Fosgate Prime R750-1D Specifications

General IconGeneral
Number of Channels1
Power Output (RMS)750 Watts
Total Harmonic Distortion (THD)< 1%
Fuse Rating80 A
Rated Power (RMS @ 2 Ohms)750 Watts
Rated Power (RMS @ 1 Ohm)750 Watts
Power Output (Peak)1500 Watts
Frequency Response20Hz - 250Hz
Input Sensitivity150 mV to 4 V
Bass Boost0 - 12 dB

Summary

Getting Started

Safety Instructions

General safety warnings and precautions before installation.

Installation

Installation Considerations

Tools and advice for preparing amplifier installation.

Battery and Charging

Ensuring the vehicle's electrical system can handle the amplifier load.

Wiring the System

Step-by-step instructions for connecting power, ground, and signal wires.

Operation

Adjusting Gain

Procedure for setting the amplifier's input gain level.

Adjusting Crossover Frequency

Setting the variable crossover point for low-pass operation.

Troubleshooting

Procedure 1: Check Amplifier for proper connections

Steps to verify power, fuses, ground, and voltage connections.

Procedure 2: Protect light is on

Diagnosing issues when the protect light is illuminated.

Specifications

Limited Warranty Information

Related product manuals