Rockford Fosgate punch 100X2 User Manual

®
®®
2-CHANNEL AMPLIFIERS
OPERATION & INSTALLATION
®
®
®
®

Rockford Fosgate punch 100X2 Specifications

General

Brand	Rockford Fosgate
Model	punch 100X2
Category	Amplifier
Language	English

Summary

Introduction and Amplifier Features

Technical Design Features Explained

Details advanced technologies like TRANS•ANA, TOPAZ, DSM, MOSFET, and NOMAD for superior audio performance.

Physical Design Features of Amplifiers

Covers heatsink, end caps, terminals, input jacks, and operational controls.

Amplifier Installation and Wiring Guide

General Installation Considerations

Lists tools, safety rules, and general installation precautions for vehicle audio systems.

Optimal Amplifier Mounting Locations

Guidance on trunk, passenger compartment, and engine compartment mounting for proper cooling.

System Wiring Procedures

Details power, ground, and remote turn-on wiring, plus RCA and speaker connections.

XCard, Crossovers, and System Diagrams

Using the XCard for Crossover Functions

Explains how to configure the XCard for high-pass, low-pass, or full range operation.

Resistor Chart for XCard Tuning

Provides resistor values for modifying the factory shipped 100Hz XCard for different crossover frequencies.

Amplifier System Wiring Diagrams

Illustrates various system configurations including 2-way, 3-way, and 4-way setups.

Operation, Troubleshooting, and Support

Troubleshooting Common Amplifier Issues

Provides common symptoms, diagnoses, and remedies for amplifier problems.

Dynamic Power Measurement Explained

Explains the IHF-202 standard for measuring amplifier output power under dynamic conditions.

Amplifier Specifications

Lists detailed technical specifications for different Punch amplifier models.

Warranty Information and Procedures

Covers warranty terms, limitations, and procedures for repairs and returns.