P4
1. Precautions
Choose the mounting location carefully so that the unit will not interfere with the
normal driving functions of the boat.
Avoid installing the unit where it would be subject to high temperature, such as
from direct sunlight or hot air , or where it would be subject to dust, dirt or excessive
vibration.
Use only the supplied mounting hardware for a safe and secure installation.
INSTALLATION
Correct mounting positions
Incorrect mounting positions
Better: 45 facing upward Best: 90 facing upward
Do not mount black box in either
of the following positions, this
will allow water to intrude and
will result in damage to the unit.
2. Mounting illustration
3. Installation Note
Please find enclosed nylon wire tie-downs(wire clamps)for added support.
use the wire clamps to hold down the harness, preventing water from running
along the wires and into the unit.
P13
CDC OPERATION
Notes for CD
(1) Keep the disk clean and undamaged, do not stick things on the dis .
(2) Do not play the damaged or transformative disc, keep the disc correctly .
(3) Do not keep the disc under sunshine or in high temperature environment .
(4) Put the disc into its box after using.
(5) Finger mark or besmirch will effect the disc playing quality, it can't be cleaned
by soft cloth. If it is necessary , diluted natural solvent can be used to help clean
the disc. Record cleaner or antistatic solvent can't be used to clean the disc.
c
CDC Operation
(1) Press to power on.
(2) Connect the CDC to your unit, then press "MODE" to CDC mode.
(3) The LCD will display "disc style" " item number" "playing time".
( 4) Press " " to pause the playing.
(5) Press PRESET 2 (11) to enter REPEAT playing mode.
(6) Press PRESET 3 (12) to enter RANDOM playing mode.
(7) Follow the function key instruction to do the operation.
(8) You may press SCAN as "next- disc" button and BAND as "pre-disc" button
for change disc operation.
To Next Page
Loading...
Need help?
General