Rockford Fosgate RFX9000R User Manual (English)

Questions and Answers:

J
Jacob WilliamsAug 20, 2025
Why my Rockford Fosgate Car Receiver source unit does not turn on?
- J
  Julian CabreraAug 20, 2025
  If your Rockford Fosgate Car Receiver's source unit does not turn on, first check the battery, connections, and fuses, and repair or replace them if needed. Ensure the voltage applied to the red and yellow wires is between 10.8 and 16 volts. If the voltage exceeds +16 volts, have the electrical system inspected by an authorized car service center. Also, verify that the unit is properly grounded by checking the wiring and making any necessary repairs.
J
Jessica JohnsonAug 23, 2025
How to fix CD skipping excessively on Rockford Fosgate Car Receiver?
- C
  Caitlin RobertsonAug 25, 2025
  If your Rockford Fosgate Car Receiver's CD skips excessively, check the mounting angle of the source unit, ensuring it's within ±20° from horizontal, and repair if necessary. For standard mounts, check the tightness of the installation sleeve and back strap, repairing or replacing as needed. If you have an ISO mount, check the tightness of the mounting screws and repair or replace as necessary.
L
Lisa PriceAug 26, 2025
Why does my Rockford Fosgate RFX9000R IR remote has poor range?
- M
  Michael HoodAug 26, 2025
  If your Rockford Fosgate Car Receiver's IR remote has poor range, first check the battery condition and replace it with a CR2025 (+3 volt) battery if necessary. Clean the transmitter and receiver lenses with a Plexiglas solution and a non-abrasive cloth to remove any dirt or dust. Ensure that you are operating the remote within approximately 15 feet and ±45° from the horizontal of the source unit’s faceplate. High sunlight conditions can also affect the range, so try operating the remote closer to the unit.
M
Mitchell HunterAug 27, 2025
Why does my Rockford Fosgate Car Receiver tuner has poor reception?
- Q
  qmooreAug 27, 2025
  If your Rockford Fosgate Car Receiver's tuner has poor reception, check the antenna connections and ensure it's properly grounded to the vehicle, repairing or replacing as necessary. Disconnect the antenna and test with a known working antenna to see if the tuner works; if it does, check the installation and repair the antenna. If the antenna is the wrong type for AM/FM frequencies, consult your local Authorized Rockford Fosgate Dealer for proper antenna selection.
J
Jeffrey StaffordAug 30, 2025
What to do if my Rockford Fosgate RFX9000R Car Receiver IR remote does not work?
- C
  candicehamiltonAug 30, 2025
  If your Rockford Fosgate Car Receiver's IR remote does not work and the LED does not illuminate, check the battery condition and replace it with a new CR2025 (+3 volt) battery if needed. Verify that the battery is installed correctly, ensuring the polarity matches the indication on the PC board.
Y
youngnicholasAug 31, 2025
Why do my Rockford Fosgate RFX9000R Car Receiver speakers pop when turning on/off?
- J
  Jared FrederickSep 1, 2025
  If your Rockford Fosgate Car Receiver's speakers pop when turning the source unit on or off, check the wiring of the auto antenna and remote B+ to ensure they are configured properly, repairing as necessary. Check connections and bypass all components between the source unit and the amplifier, connecting one component at a time to determine the culprit. Connect this component to the Blue wire and check for pops. Repair or replace the component if needed.
C
carriepearsonSep 3, 2025
What does ERROR 7 mean on Rockford Fosgate RFX9000R Car Receiver?
- B
  Barbara PowersSep 3, 2025
  If your Rockford Fosgate Car Receiver displays ERROR 7 (Servo Error), clean the disc to remove any dirt or dust. If the disc is warped, cracked, or severely damaged, try a different disc. Also, try a different disc if the current one has excessive scratches.
M
Maria BrownSep 4, 2025
What does ERROR 9 mean on Rockford Fosgate RFX9000R Car Receiver?
- C
  colleen84Sep 4, 2025
  If your Rockford Fosgate Car Receiver displays ERROR 9 (TOC Error), try using a different disc to rule out issues with the disc itself, such as it being cracked, warped, or severely damaged. If the issue persists, the laser pickup may be defective, requiring repair by a service center. Additionally, the servo unit in the CDP mechanism might not be operating properly, necessitating a check of the servo circuit area and repair as needed.
D
Daniel AllenSep 6, 2025
What does ERROR 3 mean on Rockford Fosgate Car Receiver?
- R
  Ryan SmithSep 6, 2025
  If your Rockford Fosgate Car Receiver displays ERROR 3 (Loading Error), check the CDP mechanism load area for any foreign objects by removing the faceplate, and repair as necessary. If the loading area in the mechanism and loading motor (or driving circuit) is defective, repair the mechanism and loading motor (or driving circuit).
R
Richard TannerSep 8, 2025
What does ERROR 4 mean on Rockford Fosgate RFX9000R?
- K
  Kathleen SmithSep 8, 2025
  If your Rockford Fosgate Car Receiver displays ERROR 4 (Eject Error), check the CDP mechanism eject area for any foreign objects by removing the faceplate, and repair if necessary. If the eject area in the mechanism and ejecting motor (or driving circuit) is defective, repair the mechanism and loading motor (or driving circuit).

Rockford Fosgate RFX9000R Specifications

General

DIN Size	Single DIN
Wireless Remote	Yes
Built-in Equalizer	Yes
Faceplate Security	Detachable
Power Output	50 Watts x 4 Channels
Compatible Audio Formats	MP3, WMA