ABOUT THE UNIT
Thank you for applying our multi-function portable power station. In case of power
failure or you need to charge on a travel, you can temporarily charge your electrical
or digital devices with this unit. This unit can provide USB, DC and AC output. You can
keep laptops, appliances, lights and more going for hours longer. Before using this
unit, please read the user manual carefully and properly keep it for reference.
ATTENTION!
This manual is to help you use the product correctly; it does not represent any
description on the hardware and software configuration of the product. About the
product configuration, please refer to the contract related to this product (if there is),
or consult to the seller that sells the product. Pictures in this manual is for reference
only, if there are individual pictures do not match the actual, please prevail in actual
products.
The unit provides Modified Sine Wave output
The unit provides Modified Sine Wave output, and can be compatible to AC electric
appliance that works with Sinusoidal waveform (power <80W). However, anything
that uses an AC motor isn't going to work to full capacity on a modified sine wave.
Such as an electrical fan, it will even make the electric appliance arouse some noise.
Appliances like refrigerators, microwaves, and compressors that use AC motors and
some delicate medical equipment will be better off with a pure sine wave inverter.
This product is only used for emergency, it cannot replace the normal alternating
current, for long-term use, please adapts the power station specification required by
electrical appliances.
【I】PRODUCT PARAMETERS
2 x USB 5V-2.4A Total:4.8A Max
2 x USB 5-12V/2A Qualcomm QuickCharge3.0(18W Max,
Total: 5V/3.4A max)
1 x USB C 5V/3A,9V/2A,12V/1.5A(PD2.0 18W Max)
To Next Page
Loading...
