Rockville HOUSE PARTY SYSTEM 10 User Manual (English)

Questions and Answers:

J
James Chan DVMJul 27, 2025
Why is there no sound or distorted sound coming from my Rockville HOUSE PARTY SYSTEM 10?
- O
  ochapmanJul 27, 2025
  If your Rockville Speaker System has no sound or the sound is distorted, verify that all input cables are correctly connected. Check the volume settings on both the unit and the remote control. Ensure the input source volume is properly adjusted. If you're using microphones, confirm they are turned on and their volume controls are correctly set. If the volume and EQ settings are maxed out, reduce one of them to prevent overdriving the unit.
M
Maria HenryJul 31, 2025
How to troubleshoot a Rockville HOUSE PARTY SYSTEM 10 Speaker System that won't turn on?
- J
  Jeremy TaylorJul 31, 2025
  If your Rockville Speaker System is not getting power, ensure the unit is plugged into a working outlet and that the power switch is in the ON position. Also, check that the power cable is securely plugged into the unit.
K
Karen WeaverAug 4, 2025
What to do if Bluetooth pairing fails on my Rockville HOUSE PARTY SYSTEM 10 Speaker System?
- R
  ronald49Aug 4, 2025
  If your Rockville Speaker System is failing to pair via Bluetooth, first check that both devices are powered on and that your Bluetooth device is discoverable. Try turning both devices off and then on again. Ensure you've selected the correct source on the speaker. Make sure the Bluetooth device is within 5 feet of the unit and away from other Bluetooth devices, microwaves, wireless routers, and other electronics. Verify that the unit is not already paired with another device or speaker.
K
Kristie WelchAug 9, 2025
How to stop mic feedback on my Rockville HOUSE PARTY SYSTEM 10?
- M
  Megan HowardAug 9, 2025
  To eliminate mic feedback from your Rockville Speaker System, point the microphones away from the speaker and make sure they are positioned behind the speaker.
H
Heather KennedyAug 13, 2025
Why is my Rockville Speaker System making a buzzing sound?
- K
  Kevin ScottAug 14, 2025
  If you are experiencing a buzzing sound with your Rockville Speaker System, ensure you are using the correct type of cable. For ¼? cables, remember there are instrument cables and TS (unbalanced) and TRS (balanced) cables. Check the requirements of both the connected gear and the speaker's input, and then use the appropriate cable.
M
Mr. Lance JenkinsAug 17, 2025
How to improve poor mic sound on my Rockville HOUSE PARTY SYSTEM 10?
- J
  jonesbenjaminAug 17, 2025
  If your Rockville Speaker System has poor mic sound, first, ensure the microphones are switched on. Next, verify that you are using the correct type of cable. Finally, check that the volume settings are adequately turned up.
J
jennifer53Aug 22, 2025
What to do if my Rockville HOUSE PARTY SYSTEM 10 won't play from SD or USB?
- T
  Thomas WellsAug 22, 2025
  To troubleshoot no SD or USB playback on your Rockville Speaker System, first, make sure you have selected the correct source. Next, verify that the audio files are in the specified format. Also, ensure that the drive's capacity does not exceed the acceptable limit.