Need help?Do you have a question about the Rockville RBG-15S and is the answer not in the manual?
General| Type | Active PA Speaker |
|---|---|
| Impedance | 8 Ohms |
| Outputs | XLR |
| Bluetooth | Yes |
| USB/SD Card Playback | Yes |
| Microphone Input | Yes |
| Built-in Equalizer | Yes |
| Woofer Size | 15 inches |
| Inputs | XLR, 1/4", RCA |
| Built-in Effects | Echo |
| EQ Controls | Bass and Treble |
Details the power, woofer size, frequency response, and maximum SPL for the RBG-15S subwoofer model.
Details the power, woofer size, frequency response, and maximum SPL for the RBG-18S subwoofer model.
Lists key features including powered operation, DSP, input/output options, cooling, and construction details.
Provides essential safety guidelines for operating the subwoofer, including electrical shock prevention and proper placement.
Explains the differences between balanced and unbalanced audio cables and their suitability for different applications.
Illustrates a typical setup for connecting the Bass Gig subwoofers to a mixing board.
Guides on setting subwoofer polarity (0 or 180 degrees) based on placement relative to main speakers for time alignment.
Diagram and labeling of the rear panel inputs, outputs, controls, and indicators for the RBG-18S model.
Explanation of the level control, full-range XLR/TRS combo input, and XLR output functions.
Details on the polarity switch and the function of Limit, Clip, Signal, and Power LED indicators.
Description of the D-XSUB, Bass Boost, Extended Low Frequency, and Low Pass Frequency selector functions.
Information on the voltage selector, IEC power socket, fuse compartment, and power switch.
Steps to resolve issues where the subwoofer does not turn on, including checking connections and fuse replacement.
Guidance for resolving issues related to no sound, noise, hiss, or hum at the output.
Declaration of compliance with FCC rules for Class B digital devices and measures to mitigate interference.
To Next Page