What to do if my Rockville ROCK PARTY 6 Speakers have no power?
If your Rockville Speakers have no power, here are a few things to check: 1. Ensure the unit is plugged in and the power switch is in the ON position. 2. Verify the power cable is securely plugged into the unit. 3. Confirm that the battery is fully charged.
What to do if Bluetooth/TWS pairing fails on my Rockville Speakers?
If you're having trouble pairing your Rockville Speakers via Bluetooth/TWS, try these steps: 1. Make sure both devices are on and your Bluetooth device is discoverable. 2. Turn both devices off and then on again. 3. Select the correct source. 4. Keep the Bluetooth device within 5 feet of the unit. 5. Move both devices away from other Bluetooth devices, microwaves, wireless routers, and other electronics. 6. Ensure the unit isn't paired with a previously connected device or another speaker.
Why is there no sound or distorted sound from my Rockville Speakers?
If you're experiencing no sound or distorted sound from your Rockville Speakers, consider the following: * Check that all input cables are correctly connected. * Verify all volume settings on both the unit and the remote control. * Ensure the volume of the input source is properly adjusted. * If using microphones, confirm their volume controls are correctly set and that the microphones are turned on. * If volume and EQ settings are maxed out, reduce one of them to prevent overdriving the unit.
Why do my Rockville Speakers have a buzzing sound?
A buzzing sound from your Rockville Speakers can often be attributed to the cable being used. Ensure you are using the correct type of cable. For ¼? cables, there are instrument, TS (unbalanced), and TRS (balanced) options. Verify the requirements of the connected equipment and the speaker's input to select the appropriate cable.
What causes mic feedback in Rockville Speakers and how to fix it?
Mic feedback in Rockville Speakers can be resolved by pointing the microphones away from the speaker and ensuring they are positioned behind the speaker.
What to do if there is no SD or USB playback on Rockville ROCK PARTY 6 Speakers?
If your Rockville Speakers aren't playing back from SD or USB, check these things: 1. Make sure you've selected the correct source. 2. Ensure that the audio files are in the specified format. 3. Confirm that the drive is not larger than the acceptable capacity rating and that it is properly formatted.
Why is the mic sound poor on my Rockville ROCK PARTY 6 Speakers?
If you are experiencing poor mic sound with your Rockville Speakers, verify the following: * Ensure the microphones are switched on. * Confirm you're using the correct cable. * Check that the volume settings are appropriately adjusted.
General| Type | Portable Bluetooth Speaker |
|---|---|
| Bluetooth | Yes |
| USB Input | Yes |
| SD Card Input | Yes |
| FM Radio | Yes |
| Microphone Input | Yes |
| AUX Input | Yes |
| LED Lighting | Yes |
| Woofer Size | 6.5 inches |
| Tweeter Size | 1" |
| Battery | Rechargeable |
| Inputs | USB, SD Card, AUX, Microphone |
Guidance on microphone placement to prevent audio feedback when using the speaker.
Detailed explanation of the buttons and ports on the speaker unit.
Description of the buttons and their functions on the remote control.
Instructions for connecting two Rock Party 6 speakers wirelessly.
Steps to pair and connect Bluetooth devices to the speaker.
How to connect and use wired microphones with the speaker.
Guide to playing music files from USB drives or SD cards.
Instructions for connecting external audio sources via the AUX input.
To Next Page