Rockwell Automation PanelView Plus 1000 User Manual

Publication 2711P-UM001I-EN-P - December 2008 201
Upgrade Firmware Chapter 8
2. Select Upgrade firmware on terminal and click OK.
3. Select Network connection and click Next.
Use the Ethernet and Serial connections only if the firmware
upgrade is unsuccessful.
4. Locate the terminal on your Ethernet network via its IP address.
Skip to step 6 if you found the terminal. If you do not see the
terminal, right-click the Ethernet driver and add the device to the
browse tree.

Rockwell Automation PanelView Plus 1000 Specifications

General

Brand	Rockwell Automation
Model	PanelView Plus 1000
Category	Touch terminals
Language	English