To Next PageTo Next Page
Need help?Do you have a question about the Rockwell Automation 2711P-T7C22D9P and is the answer not in the manual?
General| Power Supply | 24 VDC |
|---|---|
| Display Type | Color TFT LCD |
| Resolution | 800 x 480 pixels |
| Touch Screen | Resistive |
| Communication Ports | RS-232 |
| Ethernet | Yes |
| Operating System | Windows CE |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 5% to 95% non-condensing |
| Enclosure Rating | NEMA 4X (IP65) |
Information for operating the equipment in hazardous locations, including warnings.
Step-by-step guide for mounting aluminum terminals into a panel.
Step-by-step guide for mounting stainless steel terminals into a panel.
Details on connecting the terminal to a 24V DC power supply, including ratings and safety precautions.
Details on connecting the terminal to an AC power supply, including ratings and compatibility.
Steps to load and run a FactoryTalk View ME .mer application on the terminal.
Guide to manually enter or automatically assign an IP address to the terminal via DHCP.
Steps to recalibrate the touch screen when it's not responding correctly to taps.
How to log diagnostics to a remote computer for troubleshooting purposes.
How the Backup and Restore application works for system images and HMI devices.
Configures settings for a client device to view or control the terminal over a VNC connection.
How to obtain updates for the operating system and applications on the terminal.
Guide for installing USB printers on Series A terminals; Series B supports network printing.
Instructions for replacing the lithium battery that backs up the real-time clock and static RAM.
Explains how firmware components are updated via XIP regions and SC .img files.
How to download firmware packages from Rockwell Automation website for Series A terminals.
Using the FUW to update terminal firmware via update card or network connection.
Steps to upgrade firmware using a USB drive or SD card as an update card.
How to update firmware on a terminal connected via a direct network connection using FUW and FactoryTalk Linx.
How to update firmware on Series B terminals using a USB storage device.
Information on updating firmware using ControlFLASH Plus or ControlFLASH client.
Step-by-step guide for updating firmware using ControlFLASH Plus.
How to update DLR network switch firmware for Series B terminals using Control Flash.
Troubleshooting guide for when the terminal does not start up normally.
Troubleshooting guide for when the terminal restarts intermittently.
How to troubleshoot touch screen issues when it's not responding correctly.
Troubleshooting steps for when the display is unreadable or dims unexpectedly.
Tips for isolating and resolving Ethernet connection anomalies.
How to start and perform operations in Maintenance Mode for Series A terminals.
How to enter and use Maintenance Mode for Series B terminals.
