182 Rockwell Automation Publication 2711P-UM008I-EN-P - February 2022
Chapter 6
Series B Terminals
(1)
To enable printing on Series B terminals (Series C for Stainless Steel terminals),
the Internet Printing Protocol (IPP) service needs to be turned on. By default,
this service is turned off.
To enable the Internet Printing Protocol (IPP) Service:
1. Navigate to the Windows Control Panel.
2. Select the Settings Menu (Gear Icon).
3. Select Services.
4. Under Internet Printing Protocol (IPP), move the slider to the right to
turn the service on.
5. Enter the Administrator password when prompted.
6. Verify that the slider is on the right in the on position.
For instructions on how to set up the printing in the Machine Edition
environment on the terminal, see Configure Print Options
on page 102.
(1) Series C for Stainless Steel terminals.
To Next Page
Loading...
Need help?
General
