80 Rockwell Automation Publication 2711P-UM008I-EN-P - February 2022
Chapter 3
5. To return to Desktop Access Management, press Enter again.
Notice that the password is no longer set.
6. Press OK to exit Desktop Access Management, then Close to exit
terminal settings and return to the FactoryTalk View ME Station dialog
box.
7. To access the desktop, press Exit.
When desktop access is enabled, you are not required to enter a
password.
Disable Desktop Access
To restrict desktop access, define a desktop password and challenge question:
• The password lets you access the desktop from FactoryTalk View ME
Station when pressing Exit.
• The challenge question and response lets you change the password with
the Reset function.
IMPORTANT To restrict desktop access, the start-up option must be set to either Go to
Configuration Mode or Run Current Application. See page 84
for details.
To Next Page
Loading...
Need help?
General
