Publication 2711P-UM001I-EN-P - December 2008 75
Configuration Mode Chapter 4
Define Name Server Addresses
You can define name server addresses for the EtherNet/IP network
adapter. These addresses are automatically assigned if DHCP is
enabled for the network adapter.
Follow these steps to define name server address.
1. Select Terminal Settings>Network and
Communications>Network Connections>Network Adapters.
2. Press a button to enter a name server address.
3. Press OK when done.
Field Description Valid Values
Primary DNS The address of the primary DNS resolver. xxx.xxx.xxx.xxx
Secondary DNS The address of the secondary DNS resolver. xxx.xxx.xxx.xxx
Primary WINS The address of the primary WINS resolver. xxx.xxx.xxx.xxx
Secondary WINS The address of the secondary WINS resolver. xxx.xxx.xxx.xxx
To Next Page
Loading...
Need help?
General
