TROUBLESHOOTING
1. WHY DOES THE DRILL NOT TURN ON WHEN YOU PRESS
THE SWITCH?
The forward and reverse switch, which is on top of the
trigger, is positioned in the lock function. Unlock the
forward and reverse switch putting it into the required
rotation position. Push the trigger and the drill will
start to rotate.
2. THE DRILL STOPS BEFORE THE SCREW IS COMPLETELY
TIGHTENED. WHY?
Verify the torque position of the variable clutch, you
can nd the variable clutch between the chuck and
the drill body. Position 1 is the lowest torque (screw
driving force) and position 20 is the highest torque
(screw driving force). Position is for drill operation.
Regulate the variable clutch to a higher position to
reach the best result.
3. I CANNOT FIT THE BATTERY INTO THE BATTERY
CHARGER. WHY?
The battery can be inserted into the charger only in
one direction. Turn the battery around until it can be
inserted into the slot.
4. REASONS FOR DIFFERENT BATTERY PACK WORKING
TIMES.
Charging time issues, as above, and having not used
a battery pack for a prolonged time will reduce the
working life of the battery pack. This can be corrected
after several charge and discharge operations by
charging & working with your drill. Heavy working
conditions such as large screws into hard wood will
use up the battery pack energy faster than lighter
working conditions. Do not re-charge your battery
pack below 0
o
C and above 30
o
C as this will affect
performance.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your tool,
battery pack or charger. Never use water or chemical
cleaners to clean your tool. Wipe clean with a dry
cloth. Always store your tool in a dry place. Keep the
motor ventilation slots clean. Occasionally you may
see sparks through the ventilation slots. This is normal
and will not damage your power tool.
Staple your purchase receipt here
Before returning this product for
warranty or any other reason, please call.
POSITEC AUSTRALIA PTY LIMITED
ABN 14 101 682 357
Unit 15, 23 Narabang Way Belrose 2085
NSW Australia
FREE CALL 1300 889 028
EMAIL:ofce.sales@positec.com.au
To Next Page
Loading...
