Rodann TX1000A User Manual (English)

To Next Page

RodannTechwww.rodanntech.com

TX1000A&RX1000AWirelessAlertSystem

TheTX‐1000A/RX‐1000Amotiondetectorincorporatesstate‐of‐the‐artpassiveinfrared(PIR)

sensortechnologywithwirelessconveniencefordetectinginfraredenergyemittedbythehuman

body,wheninmotion,withinagivendetectionarea.Thisunitisnotaffectedbysunlight,car

headlights,reflections,shadows,orcolorsandwilloperatewithadooropenorclosed.



 FEATURESINCLUDE:

 Detectorpoweredby9VoltBattery

 Wirelesssignalupto500ftforindooruse

 Longbatterylifecircuitdesign

 Fullyautomatic,noalignmentrequired.

 Receiverpoweredbyeconomical12VDC,ULApproved,plug‐in

powersupply(nobatteries

tochange). 

 Operatesaccessorybuzzer,siren,speakerorstrobeincludingresettable5digitLCD

counters(forcustomercounting).

 Uncomplicatedwiringforaccessories,installsinminutes.

 Universalmountingbracketallowsforeasyceiling,wallorsidemounting.

 Fullyautomaticandmaintenancefree(noreflectorsorcontrolstoalign).

 Oneyearwarrantyagainstdefectsinmaterialorworkmanship.

 Welcomeswithapleasantsoundingchime.

Need help?

Do you have a question about the Rodann TX1000A and is the answer not in the manual?

Rodann TX1000A Specifications

General

Lists the main features of the TX1000A/RX1000A system, including battery, wireless range, and automatic operation.

Details the range of accessories compatible with the TX1000A/RX1000A system, such as sensors, notifiers, sirens, and speakers.

Guidance on optimal positioning of the TX1000A motion detector to avoid false signals and ensure best performance.

Step-by-step instructions for opening the unit and correctly installing the 9-volt battery.

Instructions on setting up tones and coding for the TX1000A transmitter and RX1000A receiver for proper operation.

Details on mounting the RX1000A receiver, its power supply, and considerations for placement to avoid performance hindrances.

Instructions on how to use dip-switch #5 on the RX1000A to add a 5-second delay between unit rings.