Need help?Do you have a question about the RODE Microphones NT1-AI-1 and is the answer not in the manual?
Specifies the necessary operating system and USB port requirements for the AI-1.
Details the connectors and controls on the front of the AI-1 unit.
Details the connectors on the back of the AI-1 unit.
General| Type | Condenser |
|---|---|
| Acoustic Principle | Pressure Gradient |
| Polar Pattern | Cardioid |
| Frequency Response | 20Hz - 20kHz |
| Output Impedance | 100Ω |
| Power Requirement | 48V Phantom power |
| Output Connection | XLR |
| Included Accessories | dust cover, XLR cable |
To Next Page