7
THE USAGE AREA AND PRODUCT LIFE TIME
This device is used to avoid pumps, Jet pumps, and Hydrophore from working dry as a circuit
breakers.
SAFETY INSTRUCTIONS
Read all instructions, failure to follow all instructions listed below may result in electric shock, fire
and/or serious injury.
1. The electric wires have to be protected from moisture.
2. Circuit breaker switch should be complied with the standarts and be flawless.
3. Apply the electirical connections in the places under no risk of water collection and such
places under risk of water collection or apply the connections higher places.
4. This device cannot be used for any other liquids.
On the cover back and inside the terminal board, a drawing shows how to make connections
correctly. The cable used should have 6 mm min. and 9 mm max. outside diametre, in order to
guarantee the water tight enclosure of the box, the four screws on its box must be tightly screwed.
To Next Page
Loading...