EasyManuals Logo

ROE BP3 User Manual

Default Icon
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
The data cables provided with this system have special properties for safety. They are not user service-
able. If the data cables are damaged, replace them only with new ones. Never try to repair a data cable.
Per requirements of the National Electrical Code in the USA, the length of a data cable must not
exceed 100 m (332 feet). Avoid exposure of data cables to accidental contact with lightning or power
conductors.
PROTECTION FROM FIRE
Do not stick lters, masks or other materials directly onto LED modules.
Do not modify the product in any way not described in this manual.
Install only genuine ROE parts in or on the product unless an alternative is described in this manual.
Create an installation by installing tiles at the top and working downwards. Disassemble an installation
by removing tiles at the bottom and working upwards.
Check that all external covers and rigging hardware are securely fastened.
Block access below the work area and work from a stable platform whenever installing, servicing or
moving the product.
Do not operate the product full load if the ambient temperature of power units (Ta) exceeds 50°C (122° F)
or less than -20°C(-4° F).
PROTECTION FROM INJURY
Important warnings
Maximum and minimum ambient temperature:
The maximum ambient temperature for the LED wall is 50 °C; the minimum temperature is (-20°C.)
High leakage current:
The combination of power boxes in an installation results in increased levels of Leakage current.
In order to avoid risk of electric shock due to high leakage current, proper grounding of the installation
is required.
Power system
Mains cords:
The power cords delivered with this system have special properties for safety. They are not user
Serviceable. If the power cords are damaged, replace them only with new ones. Never try to repair a
power cord.
This equipment MUST be earthed:
In order to protect against risk of electric shock, the installation should be properly grounded.
Defeating the purpose of the grounding type plug will expose you to the risk of electric shock.
User Manual P4
Data cables:
®

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ROE BP3 and is the answer not in the manual?

ROE BP3 Specifications

General IconGeneral
BrandROE
ModelBP3
CategoryMonitor
LanguageEnglish

Related product manuals