Need help?Do you have a question about the ROEL Cerber C41V1 and is the answer not in the manual?
General| Brand | ROEL |
|---|---|
| Model | Cerber C41V1 |
| Category | Control Panel |
| Language | English |
Details power, input, and output specifications of the alarm system.
Guides on mounting the control panel and keypad, and wiring procedures.
Explains the purpose and specifications of various PCB connectors.
Describes the Master Code, user codes, and Ambush code functions.
Specifies the default installer code and the command to access programming.
Outlines the steps and conditions for arming the alarm system.
Details Quick, Instant Stay, and Stay arming modes.
Explains the procedure to disarm the alarm system upon entry.
Covers zone bypassing, system state display, and alarm memory.
Instructions for recording and checking vocal messages on the C41V1 panel.
Instructions for recording and checking vocal messages on the C41V4 panel.
Describes how to access the system parameter programming mode using the installer code.
Introduces the structure of system parameters grouped into sections 01 to 14.
Details how to program up to seven phone numbers for alarm notification.
Configures message length and the number of dialing attempts per phone number.
Defines zone types (Entry/Exit, Instant, Follower, 24-Hour) and alarm types.
Sets up special key zone functions like panic or arming/disarming.
Programs system delays like Entry Delay, Exit Delay, and Bell Cut-off Time.
Instructions for changing the default installer's code for security.
Configures the behavior of PGM1 and PGM2 programmable outputs.
Selects dialing mode (Pulse/DTMF) and message transmission options.
Fields for programming up to seven phone numbers for alarm notification.
Fields to set message duration and dialing attempts.
Fields for defining zone types and alarm responses.
Fields for programming key zone types and behaviors.
Fields for setting entry, exit, and bell cut-off times.
Field to input the new installer's code.
Fields to configure programmable output options for PGM1 and PGM2.
Fields to select dialing mode and message transmission.
To Next Page
