Setup
1MA236_0e Rohde & Schwarz Remote Operation of Windows Based T&M Instruments with Android Tablets 15
The 2X Client application is started. Then it shows the already defined connections (if
there are any), or detects that there is no connection and opens a dialog box.
Fig. 13: 2X Client – no connections
Setup a New RDP Connection:
This section is only relevant for the first setup of the RDP connection. The settings will
be remembered at later starts.
2. If the dialog box is shown (no RDP connection has been configured before), tap
"OK" in the dialog box. Else, tap "ADD" on the upper right corner.
A new screen is displayed.
3. Select "RDP Connection".
The "Connection" screen is displayed.
4. Enter the connection information according to the figure below.
The hostname of the T&M instrument in the "Alias" row (optional);
this name provides a readable identification of the connection
The T&M instrument's IP address in the "Server" row; see Prerequisites above
for details about the IP address.
The port number "3389" which is the default TCP port for Windows RDP con-
nections and which the T&M instrument listens to
The T&M instrument's user name "instrument" which is fixed (optional)
The password for the T&M instrument (optional)
(see the user manual for the instrument)
Note: If you have entered the instrument's user name and password, these
settings will be used to skip the login window of the T&M instrument. Other-
wise, the login window will be displayed when you connect to the instrument
and you have to log in manually.
To Next Page
Loading...
