What to do if Rohde & Schwarz Portable Generator shows 'Adjustment data invalid'?
If the Rohde & Schwarz Portable Generator shows 'Adjustment data invalid', the adjustment data are invalid and must be restored. The adjustment data have to be generated again by an internal or external adjustment or loaded into the instrument.
What to do if Rohde & Schwarz Portable Generator says 'Adjustment data missing'?
If the Rohde & Schwarz Portable Generator indicates that adjustment data are missing, they have to be generated first by an internal or external adjustment or loaded into the instrument.
Why does Rohde & Schwarz Portable Generator display 'Extern reference out of range or disconnected'?
The Rohde & Schwarz Portable Generator displays 'Extern reference out of range or disconnected' because the external reference is selected, but no external signal is applied, or the signal is out of range. To solve this: * Check the selected reference signal source (internal or external) in the 'Setup > Reference Oscillator' dialog. * Change the setting to 'internal' if no appropriate external source is available.
What to do if Rohde & Schwarz Portable Generator displays 'Adjustment failed'?
If the Rohde & Schwarz Portable Generator displays 'Adjustment failed', it means the adjustment could not be executed. The adjustment data have to be generated first by an internal or external adjustment or to be loaded into the device.
What to do if my Rohde & Schwarz Portable Generator displays 'File contains invalid data'?
If your Rohde & Schwarz Portable Generator displays 'File contains invalid data', check the file extension, as the selected file contains data that is not valid for the file type.
What does it mean when Rohde & Schwarz Portable Generator displays 'Hardware revision out of date'?
When the Rohde & Schwarz Portable Generator displays 'Hardware revision out of date', it means a later version of certain parts of the instrument is necessary to execute the function selected because the driver does not support the installed version of a module.
What does it mean when Rohde & Schwarz Portable Generator displays 'Invalid filename extension'?
If the Rohde & Schwarz Portable Generator displays 'Invalid filename extension', check the file extension. For instance, the file extension for waveform list files is *.wv. It is not possible to enter another file extension when storing a list, as the file extension is not valid for the required operation.
What to do if Rohde & Schwarz Portable Generator displays 'Filename missing'?
If the Rohde & Schwarz Portable Generator displays 'Filename missing', a file name has to be entered when creating a new list because the required operation cannot be executed as the file name is not specified.
What does it mean if Rohde & Schwarz Portable Generator displays 'Unknown list type specified'?
If the Rohde & Schwarz Portable Generator displays 'Unknown list type specified', check the selected list type because it is not valid for the required operation.
What to do if my Rohde & Schwarz Portable Generator displays 'No current list'?
If the Rohde & Schwarz Portable Generator displays 'No current list', a list has to be selected in the related menu to execute the required operation. If no list is available, a new list must be created, because there is no list selected.
General| Brand | Rohde & Schwarz |
|---|---|
| Model | SMBV100A |
| Category | Inverter |
| Language | English |
To Next Page
