Rohde & Schwarz SMBV100A - SCPI Command Structure

Remote Control Basics
R&S
®
SMBV100A
483Operating Manual 1176.8016.02 ─ 17
while( !terminate )
{
char buffer[1024];
if( useSingleCommand )
{
input = singleCommand; //send string
}
else
{
cin.getline( buffer, 1024 );
input = buffer;
if( input == "end" )
{
terminate = true;
}
}
if( !terminate)
{
client.transmit( input ); //send string
int qPos = input.find( "?", 0 );
//receive string only when needed
if( qPos > 0 )
{
string rcStr = "";
client.receive( rcStr );
cout << rcStr << endl;
}
}
if( useSingleCommand )
{
terminate = true;
}
}
}catch( const string errorString )
{
cout<<errorString<<endl;
}
client.disconnect( );
return errorCode;
}
6.3 SCPI Command Structure
SCPI commands consist of a header and, in most cases, one or more parameters. The
header and the parameters are separated by a "white space" (ASCII code 0 to 9, 11 to
32 decimal, e.g. blank). The headers may consist of several mnemonics (keywords).
Queries are formed by appending a question mark directly to the header.
SCPI Command Structure