Rohde & Schwarz SMBV100A - [:Source<Hw>]:Bb:arbitrary:wsegment:cload; [:Source<Hw>]:Bb:arbitrary:wsegment

Remote Control Commands
R&S
®
SMBV100A
638Operating Manual 1176.8016.02 ─ 17
[:SOURce<hw>]:BB:ARBitrary:WSEGment?..................................................................... 638
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CLOad............................................................638
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:BLANk:APPend..............................639
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CATalog?...................................... 640
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk.......................................... 640
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk:MODE............................... 640
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:COMMent......................................641
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:DELete..........................................641
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:LEVel[:MODE]................................641
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:ESEGment....................... 642
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:FSEGment........................642
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:MARKer:MODE..............................643
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:OFILe............................................643
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:APPend..........................644
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:CATalog?....................... 644
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SELect.......................................... 644
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CREate...........................................................645
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?...........................................................645
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT............................................................. 646
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT:EXECute............................................... 646
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT:SOURce................................................646
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:APPend..........................................647
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect........................................... 648
[:SOURce<hw>]:BB:ARBitrary:WSEGment?
This command queries the currently output segment of the multi segment waveform.
Return values:
<WSegment> integer
Range: 0 to 1023
*RST: 0
Example:
BB:ARB:WSEG?
queries the currently output segment.
Response 2
segment 2 is currently output.
Usage: Query only
Manual operation: See "Current Segment" on page 394
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CLOad <FilenameInput>
Creates a and loads a multi segment waveform using the current entries of the speci-
fied configuration file.
This multi segment waveform is saved with the file name specified in the configuration
file. The file extension is *.wv.
ARB is activated, the new multi segment waveform is loaded and the first segment is
output in accordance to the trigger settings.
SOURce Subsystem