Rohde & Schwarz SMBV100A - Source:bbin Subsystem

Remote Control Commands
R&S
®
SMBV100A
716Operating Manual 1176.8016.02 ─ 17
// 67 (task in progress)
:SOURce1:BB:EUTRa:WAVeform:CREate
:SOURce1:BB:PROGress:MCODer?
// 25 (task in progress)
// :SOURce1:BB:PROGress:MCODer:DM:FILTer?
// 100
[:SOURce<hw>]:BB:PROGress:MCODer?........................................................................716
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:MCARrier?..........................................716
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:WSEGment?.......................................716
[:SOURce<hw>]:BB:PROGress:MCODer:DM:FILTer?....................................................... 716
[:SOURce<hw>]:BB:PROGress:MCODer?
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:MCARrier?
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:WSEGment?
Queries the status of an initiated process, like for example the calculation of a signal in
accordance to a digital standard, or the calculation of a multi carrier or multi segment
waveform file.
Return values:
<WSegment> integer
Indicates the task progress in percent
Range: 0 to 100
*RST: 100
Example: see Example "Querying the status of the Create Waveform file
process" on page 715
Usage: Query only
[:SOURce<hw>]:BB:PROGress:MCODer:DM:FILTer?
Queries the status of an applied offline filtering, like for example during the calculation
of a waveform and a multi carrier waveform file.
Return values:
<Filter> integer
Indicates the task progress in percent
Range: 0 to 100
*RST: 100
Example: see Example "Querying the status of the Create Waveform file
process" on page 715
Usage: Query only
7.16.4 SOURce:BBIN Subsystem
The SOURce:BBIN subsystem contains the commands for setting the external digital
and analog baseband signals.
SOURce Subsystem