Remote Control Commands
R&S
®
SMBV100A
644Operating Manual 1176.8016.02 ─ 17
Manual operation: See "Output file" on page 417
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:APPend
<Waveform>
Appends the specified waveform to the configuration file.
Setting parameters:
<Waveform> string
Example:
MMEM:CDIR '/var/user/waveform'
sets the default directory
BB:ARB:WSEG:CONF:SEL 'new'
creates the configuration file new.inf_mswv in the default
directory.
BB:ARB:WSEG:CONF:SEGM:APP 'arb1'
appends waveform arb1.wv to configuration file new. Wave-
form arb1 will be the first segment of a multi segment waveform
created with configuration file new.
Usage: Setting only
Manual operation: See " Append " on page 414
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:CATalog?
Queries the segments of the currently selected configuration file.
Return values:
<Catalog> string
Example:
MMEM:CDIR '/var/user/waveform'
sets the default directory.
BB:ARB:WSEG:CONF:SEL 'multi_sin'
selects the configuration file multi_sin.inf_mswv .
BB:ARB:WSEG:CONF:SEGM:CAT?
queries the segments of the selected configuration file.
Response: arb4, arb2
The configuration file includes the segments arb4.wv and
arb2.wv.
Usage: Query only
Manual operation: See " Append " on page 414
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SELect <Filename>
Selects the configuration file in the default directory.
A path can also be specified, in which case the files in the specified directory are
selected. If a configuration file with the specified name does not yet exist, it is created.
The file extension may be omitted. Only files with the file extension *.inf_mswv will
be selected or created.
SOURce Subsystem
To Next Page
Loading...
